c59da5ca98
Previously each curve file stored x in whatever convention the vendor used (per-element Nm³/h for Jäger/GVA, per-element Sm³/h for PIK/PRK, per-m² for Aerostrip). That meant the diffuser physics couldn't read the data uniformly — selecting Aerostrip vs Jäger would feed wildly different axes to the same interpolator. All five curves now use the same canonical X: specific air flux in Nm³/(h·m² membrane). Y stays SSOTR in g O₂/(Nm³·m); coverage % is the parametric key. Per-file conversions: - jaeger-jetflex-td-65-2-g-epdm-1000: x divided by 0.18 m² perforated area (stated on the data sheet). - gva-elastox-r: x divided by 0.18 m² placeholder mirroring Jäger TD-65 (no real GVA sheet exists — see _meta note). - aerostrip-phoenix: native already in Nm³/(h·m²) — no x change. _meta area normalised to 1.0 m² per "element" so users set `elements` = total installed membrane area in m². - pik300, prk300 (Sulzer ABS 300 mm disc): native was Sm³/h/disc on X and g O₂/(Sm³·m) on Y. Converted to canonical Nm³ basis (DIN-1343) by X × 0.9319 / 0.07, Y × 1.0732. Each disc = 0.07 m² membrane. Supplier naming fixed: pikprk → sulzer, aquaconsult → aquaconsult-entec. PIK = perforated EPDM, PRK = perforated PUR. Config schema: new diffuser.membraneAreaPerElement field (nullable, default null) so a node can override the curve's stored area. When null, specificClass reads _meta.membraneArea_m2_per_element from the resolved curve. 246/246 generalFunctions tests still pass. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
40 lines
2.8 KiB
JSON
40 lines
2.8 KiB
JSON
{
|
||
"_meta": {
|
||
"supplier": "Sulzer ABS",
|
||
"type": "Disc",
|
||
"model": "PRK300",
|
||
"membrane": "Perforated PUR",
|
||
"membraneArea_m2_per_element": 0.07,
|
||
"membraneArea_m2_per_element_note": "Sulzer ABS PIK/PRK 300 mm fine-bubble disc, ~295 mm active membrane diameter (π × 0.1475² ≈ 0.068 m², rounded to 0.07 m²). Confirm against Sulzer spec sheet if available.",
|
||
"stdAir": { "temp_C": 0, "pressure_mbar": 1013.25, "RH_pct": 0 },
|
||
"coverageBasis": "bottom-coverage-pct",
|
||
"coverageReference": [5, 10, 15, 20, 25],
|
||
"dataQuality": "multi-coverage",
|
||
"xAxisBasis": "per-m2-membrane-Nm3h",
|
||
"yAxisBasis": "ssotr-g-per-Nm3-per-m",
|
||
"waterDepth_m": 4.0,
|
||
"source": "'PIK & PRK300 data from QM.xlsx' (Sheet1). SOTE/SSOTR curves identical to the sibling PIK300; the only difference is the DWP curve (PRK = perforated PUR vs PIK = perforated EPDM).",
|
||
"note": "Native data was Sm³/h/disc on X and g O₂/(Sm³·m) on Y. Converted to canonical Nm³ basis (DIN-1343): X × 0.9319 / 0.07, Y × 1.0732."
|
||
},
|
||
"sote_curve": {
|
||
"5": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [27.87, 26.99, 25.80, 24.97, 24.38, 23.89, 23.46, 23.12] },
|
||
"10": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [30.18, 29.33, 28.15, 27.33, 26.73, 26.21, 25.83, 25.49] },
|
||
"15": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [31.51, 30.53, 29.16, 28.27, 27.57, 27.01, 26.55, 26.15] },
|
||
"20": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [32.52, 31.39, 29.88, 28.84, 28.06, 27.45, 26.92, 26.49] },
|
||
"25": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [33.26, 32.04, 30.39, 29.27, 28.45, 27.77, 27.22, 26.76] }
|
||
},
|
||
"otr_curve": {
|
||
"5": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [20.937, 20.276, 19.382, 18.759, 18.316, 17.947, 17.624, 17.369] },
|
||
"10": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [22.673, 22.034, 21.148, 20.532, 20.081, 19.690, 19.405, 19.149] },
|
||
"15": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [23.672, 22.936, 21.907, 21.238, 20.712, 20.291, 19.946, 19.645] },
|
||
"20": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [24.431, 23.582, 22.447, 21.666, 21.080, 20.622, 20.224, 19.901] },
|
||
"25": { "x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49], "y": [24.987, 24.070, 22.831, 21.989, 21.373, 20.862, 20.449, 20.104] }
|
||
},
|
||
"p_curve": {
|
||
"0": {
|
||
"x": [19.97, 26.62, 39.93, 53.24, 66.56, 79.87, 93.18, 106.49],
|
||
"y": [21.3, 24.0, 29.3, 35.3, 41.3, 46.8, 52.4, 58.6]
|
||
}
|
||
}
|
||
}
|