{ "_meta": { "supplier": "Jäger Umwelt-Technik", "type": "Tube", "model": "JetFlex TD 65-2 G", "membrane": "EPDM", "tubeLength_mm": 1000, "totalLength_mm": 1062.5, "outerDiameter_mm": 65, "membraneArea_m2_per_element": 0.18, "operating": { "continuousFlow_Nm3h_per_element": [2, 12], "maxOverloadFlow_Nm3h_per_element": 20, "operatingMode": "continuous-or-intermittent" }, "stdAir": { "temp_C": 0, "pressure_mbar": 1013.25, "RH_pct": 0 }, "coverageBasis": "bottom-coverage-pct", "coverageReference": null, "dataQuality": "point", "xAxisBasis": "per-m2-membrane-Nm3h", "yAxisBasis": "ssotr-g-per-Nm3-per-m", "waterDepth_m": null, "source": "Jäger Umwelt-Technik 'JETFLEX TD 65-2 G Tube Diffuser' data sheet — vector chart on page 2 ('SSOTE and headloss for EPDM 1000 mm'). Curve coordinates recovered directly from the PDF vector paths on 2026-05-12 (bezier endpoints of the red SSOTE polyline and blue DWP polyline); axis calibration against the gridlines is exact.", "note": "Vendor sheet states neither tank-floor coverage nor water depth at which the SSOTE curve was measured — single-coverage point estimate (key '0' = unspecified), do not extrapolate across density. Native x-axis in the sheet is Nm³/h per tube; converted to canonical Nm³/(h·m² membrane) by dividing by perforated area 0.18 m²." }, "ssote_curve": { "0": { "x": [11.11, 16.67, 22.22, 27.78, 33.33, 38.89, 44.44, 50.00, 55.56, 61.11, 66.67], "y": [8.20, 7.85, 7.57, 7.30, 7.10, 6.97, 6.85, 6.72, 6.60, 6.50, 6.40] } }, "otr_curve": { "0": { "x": [11.11, 16.67, 22.22, 27.78, 33.33, 38.89, 44.44, 50.00, 55.56, 61.11, 66.67], "y": [24.52, 23.47, 22.63, 21.83, 21.23, 20.84, 20.48, 20.09, 19.73, 19.44, 19.14] } }, "p_curve": { "0": { "x": [11.11, 16.67, 22.22, 27.78, 33.33, 38.89, 44.44, 50.00, 55.56, 61.11, 66.67], "y": [25.0, 27.5, 30.0, 32.5, 35.0, 37.5, 40.0, 42.0, 44.0, 46.0, 48.0] } } }